Overhead line tensioners - TUN

Tram infrastructure

About the product

Modern solutions for urban overhead contact lines

At MABO we strive to make our solutions not only structurally sound but also innovative and modern. That is why our research team in cooperation with specialists from the Faculty of Non-ferrous Metals at the AGH University of Science and Technology has developed a weightless spring tensioner for railway and tram traction with the tension force ranging from 4 to 42 kN. Our device is intended for anchoring the overhead contact line and its operation is based on the weightless forcing of the tensioning force, by using a special system of springs in combination with a system of transmission and regulation of the tensioning force.

Our tensioners are characterized by a simple design ensuring compensation of considerable elongations of contact wires and catenary ropes of the overhead network, and at the same time lower production cost in comparison to the solutions of foreign manufacturers, which are well known and applied.  The main difference from older generation devices is the use, instead of gravity weight, of a highly efficient spring mechanism equipped with a cam.  The spring mechanism is much lighter than the previously used solutions, in addition, it allows the use of lighter anchor columns and is also cheaper to manufacture. 


Contact
Zdjęcie Modern solutions for urban overhead contact lines
Key information

Tensioner benefits

Icon Easy to install
01Easy to install

Icon Reduced network inertia during operation
02Reduced network inertia during operation

Icon No periodic maintenance required
03No periodic maintenance required

Icon Suitable for installation on all types of catenary poles
04Suitable for installation on all types of catenary poles

Icon Protected against corrosion
05Protected against corrosion

Icon Solutions not available for criminal activities
06Solutions not available for criminal activities

Icon No deposit on packaging
07No deposit on packaging

ABOUT THE PRODUCT

Reliable overhead line tensioning system

The main principle of operation of a spring-loading device is to convert the torque of the device shaft, generated by a system of springs, into a force acting on the catenary. The change of the force (torque) characteristics generated by the spring on the shaft during its rotation is performed by a specially selected cam, in such a way as to obtain a constant force as a function of the compensated rope length change. The device ensures a constant level of the required tension force depending on the type of the network, at the same time ensuring compensation of changes in the length of contact wires and suspension cables as a result of temperature changes (change of seasons).


Zdjęcie Reliable overhead line tensioning system

Simple easy-to-install design

There are spring tensioning device solutions on the market, the design of which is based on spiral springs. In that case, an increase in the tensioning force generated by a given device is associated with an increase in the size of the spring or the number of springs required for use, and thus also the weight of the device.  Increasing the weight and size of the device leads to difficulties with its installation on traction poles. The design of our solution is based on the use of helical-coil springs with a rectangular cross-section. The use of this type of spring makes it possible to obtain a greater tensioning force and improves elasticity, which in turn improves the characteristics when extending the tension member within the range of constancy of maintained force. At the same time, the geometry of the spring reduces the size of the device as well as its weight and therefore the assembly takes place with a single spanner.

Patented  and favourably opined by the Railway Institute

This solution received patent protection in the Polish Patent Office (No. PL228589 B1 - Device for compensating changes in the catenary line length). After favourable results of both laboratory and field tests, the spring tensioning device received a favourable opinion from the Railway Institute confirming that it meets the requirements and can be used in all types of overhead networks. It also obtained the PKP PLK S.A. approval to use our solutions on the railway lines managed by them.


Zdjęcie
Product specifications

TUN – 1 (Single spring)

Single-spring overhead line tensioning device  with tensioning force from 4 to 20 kN. It is used for the upper catenary in railway and tram transport.


Enlarge 3D view
Zdjęcie TUN – 1 (Single spring)
IndexTensioning force [N]Compensation length [mm]Number of springs
TUN - 0440008001
TUN - 0660008001
TUN - 0880008001
TUN - 1095308001
 95608001
TUN - 12116708001
 121608001
 126708001
 127408001
TUN - 14134808001
 137908001
 140008001
 140508001
 142808001
TUN - 16157608001
 158908001
TUN - 18180008001
TUN - 20190708001
 191808001
 196008001

Contact our specialist

Do you have any questions for us? Our specialist will be happy to answer them.

Overhead line equipment

Bartosz Kowalczyk

Sales Specialist

  +48 731 733 508
  b.kowalczyk@mabo.pl